The Tokyo Metropolitan Area represents one of the most concentrated thermal engineering environments in the world. Characterized by severe summer heat island effects, intense humidity levels reaching beyond 80% during July and August, and strict space limitations, cooling equipment operates under unrelenting thermodynamic stress. In this high-density urban sprawl, the role of a filter drier in air conditioner installations transitions from a basic maintenance accessory to a paramount safeguard for capital-intensive chillers, multi-split Variable Refrigerant Flow (VRF) systems, and hyper-scale data center thermal loops.
The modern architectural landscapes of Chiyoda, Minato, and Shinjuku rely extensively on continuous cooling. Within these complexes, unmanaged moisture inside refrigerant circuits forms hydrofluoric and hydrochloric acids upon reacting with synthetic polyolester (POE) and polyvinyl ether (PVE) compressor lubricants. The resulting chemical corrosion attacks motor windings, causes copper plating, and degrades expansion orifices. Installing premium copper liquid line filter driers packed with advanced 3A molecular sieves provides total system desiccation, ensuring zero ice crystallization at thermal expansion valves and arresting premature compressor breakdown across Tokyo's demanding commercial infrastructure.
Elevated ambient temperatures across Ginza and Marunouchi keep condenser head pressures high, requiring heavy-duty filter driers capable of handling peak operating pressures above 4.2 MPa without structural fatigue.
Facilities around Tokyo Bay, Odaiba, and Shinagawa face marine micro-climates where external atmospheric moisture demands leak-proof argon arc welded copper shells to resist external galvanic oxidization.
Japan's Energy Conservation Act mandates peak seasonal energy efficiency ratios (APF). Pure solid-core filtration preserves clean expansion devices, cutting internal thermodynamic drag and electricity consumption.
TAOJUN was established in 1988 and has been producing copper filter driers for 41 years. We have domestic leading research and development ability in refrigeration parts, as well as industry-advanced level in refrigeration parts, quality control abilities. Since our inception, TAOJUN's competing ability is always considered to be rooted in cutting-edge technology.
TAOJUN copper filter driers are designed to absorb moisture and acid, and to filter out impurities. Normally installed as an original component and replaced as a core repair part for both domestic and commercial refrigerators, freezers, and VRF air conditioners.
In districts like Roppongi Hills and Nihonbashi, multi-tenant commercial towers rely on distributed VRF loops. Filter driers capture braze scale and residue from long pipe runs, safeguarding compressor stability.
Server clusters in Inzai and Koto Ward demand uninterrupted cooling. Filter driers provide non-stop desiccation inside precision CRAC systems, eliminating sudden thermal throttling risks.
From Toyosu Market seafood storages to Tokyo Port logistics hubs, Taojun's copper desiccant units prevent moisture freeze-ups in low-temperature expansion valves operating down to -40°C.
Furthermore, Tokyo’s regulatory landscape drives the adoption of next-generation low Global Warming Potential (GWP) fluorocarbons and natural refrigerants like CO2 (R744) and Propane (R290). In systems using mildly flammable A2L refrigerants such as R32, eliminating foreign particulates and hydrolytic catalysts is an operational imperative. Taojun’s solid core filter driers integrate specialized zeolitic matrices that physically entrap contaminant molecules without stripping the specialized polyvinylether lubricating oils favored by Japanese HVAC manufacturers.
Our core manufacturing equipment is imported directly from Germany, enabling high-precision machining, fully automated copper tube spinning, and faultless tube expansion.
We have 15 senior engineers in our R&D centre, all of them doctors or professors from the University of Science and Technology of China, pioneering smart thermal fluids design.
Customized sizes, multi-port architectures, and shapes are readily engineered. Welcome to share your project drawings with us; let’s work together to make cooling systems more creative and durable.
Core Raw Material integrity: Our ITO film (no shrinkage, no color difference) and liquid crystal spacer (excellent uniformity) are imported directly from Japan; industrial bonding glue is imported directly from Europe. Our liquid crystal operating range is 70°C, and high-temp protective film withstands 80-90°C.
Extreme endurance validation: High & low temperature testing at 75°C and -35°C for 500 hours; thermal shock cycle from 10°C to 90°C for 30 minutes; damp heat test for 500 hours; oven vacuum moisture removal; sheet films undergo 24h aging runs, and roll films face 100V high-voltage dielectric screening.
Accredited under ISO 9001:2015, ISO 9001:2008, EU RoHS environmental safety directives, and US UL certifications to meet stringent Japanese JIS and METI statutory standards.
Ningbo Taojun Refrigeration Equipment Co., Ltd. is located in Xiangshan, Ningbo, a scenic coastal industrial powerhouse. Founded in 1988, its predecessor was the Xiangshan Refrigeration Accessories Factory of Zhejiang University. The company's leading products include: filter driers, check valves, air conditioning valves, condensers, brass and copper accessories, air conditioning cable ties, and other refrigeration accessories series products.
After more than 30 years of hard work and rapid development, it has now become a comprehensive enterprise integrating the design, development, high-precision production, global sales, and after-sales technical service of refrigeration accessories. In 2021, it earned official recognition as a national high-tech enterprise. Our company is committed to technological and process innovation, continuous equipment upgrading, and the introduction of advanced lean management concepts to produce first-class products. Customer satisfaction is our unwavering pursuit. With reasonable design, reliable quality, and perfect after-sales service, the "Lingshan" filter has become a well-known brand in the domestic and global refrigeration industry.
In 2012, Ningbo Taojun Refrigeration Equipment Co., Ltd. was established, creating the brand "Taojun" condensers, "Taojun" stop valves, and expanded lines of copper assemblies. Over the years, it has established robust supply partnerships with world-renowned home appliance and commercial HVAC enterprises such as Haier, Xinfei, Midea, Gree, Whirlpool, Electrolux, and Huarui. The product sales network covers all major metropolitan centers in China and is exported across Europe, America, South America, Southeast Asia, the Middle East, Africa, and advanced East Asian markets including Tokyo, Osaka, and Yokohama.
A world brand is supported by an enduring corporate culture formed through Impact, Infiltration, and Integration. The continuous development of our group is driven by four core pillars:
Comprehensive inquiry and sizing support backed by 15 years of fluid pump and piping technical experience. Dedicated one-to-one sales engineer consultation. 24-hour service hotline with technical responses guaranteed within 8 hours.
Systematic technical training and equipment evaluation; on-site/remote installation guidance and swift diagnostic troubleshooting. Continual updates and performance improvements. One-year warranty with free lifetime engineering technical support.
Juntao Refrigeration (NINGBO TAOJUN REFRIGERATION EQUIPMENT CO., LTD.) operates under certified GB/T19001-2016 / ISO9001:2015 management systems (Registration No.: 41325Q00065R0S). Audited through CNCA (www.cnca.gov.cn) and Zhongci International (www.zcgirz.com), our facilities ensure zero-defect production of filter driers, condensers, and access valves.


























Engineered for superior heat rejection in tight Tokyo mechanical rooms, featuring high thermal conductivity and corrosion-resistant powder coatings.
Essential diagnostic manifold for HVAC service technicians across Tokyo, calibrated for R32, R410A, and next-generation thermodynamic mixtures.
Achieves deep microns of vacuum to purge residual air and atmospheric humidity prior to the installation of solid-core liquid line filter driers.
Seamless precision-drawn capillary tubing delivering predictable refrigerant pressure drops and constant mass flow rates across cooling circuits.
Heavy-duty weatherized PVC wrapping tape designed to withstand Tokyo’s UV solar radiation and severe winter fluctuations along building facades.
Energy-saving brushless motor delivering quiet ventilation, extended bearing lifespan, and strict compliance with Japanese Top Runner efficiency guidelines.