Specialized copper accumulators, brazing alloys, and desiccant drier units certified for Austrian commercial heating, ventilation, and heat pump installations.
High-efficiency liquid separation and pulsation reduction tailored for Alpine heat pumps and variable refrigerant flow systems.
Explore Specifications →Premium brazing alloy engineered for hermetic seal reliability under heavy cyclic thermal expansion in Austrian industrial setups.
Explore Specifications →Advanced solid core desiccant cartridge ensuring deep moisture adsorption and zero acid contamination for commercial hospitality refrigeration.
Explore Specifications →Ultrasonically cleaned high-grade copper tube drier for domestic refrigerators, freezer showcases, and compact heat exchangers.
Explore Specifications →Analyzing alpine climatic requirements, strict European fluorinated greenhouse gas directives, and regional industrial demand in Vienna, Linz, Graz, and Salzburg.
Austria's distinct geographical positioning, spanning the Eastern Alps and the Danube River basin, sets stringent operating criteria for heating, ventilation, air conditioning, and commercial refrigeration (HVAC/R). In industrial hubs such as Upper Austria (Linz, Wels), Styria (Graz), and the metropolitan hub of Vienna, thermal machinery operates under intense annual temperature deltas ranging from sub-zero Alpine winters (-20°C) to hot continental summer peaks (+35°C). Under these fluctuations, moisture ingress and lubricant chemical breakdown pose devastating threats to compressor health.
HVAC filter driers serve as the primary defensive barrier within the sealed thermodynamic circuit. By incorporating molecular sieves engineered for high water adsorption capacity and activated aluminas to neutralize corrosive acids, high-performance copper filter driers ensure that Austrian installations achieve optimal Coefficient of Performance (COP) while avoiding expansion valve freeze-ups and compressor motor burnout.
Austria leads the European Union in green transition protocols, backed by national initiatives from the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology (BMK). With the aggressive phase-down mandated by EU Regulation 2024/573, Austrian original equipment manufacturers (OEMs) and installers are rapidly shifting to low-GWP natural refrigerants, prominently Propane (R290), Isobutane (R600a), and Carbon Dioxide (R744 / CO2 transcritical systems).
This rapid shift imposes heightened technical parameters on filter driers: mechanical shells must withstand substantially higher burst pressures (up to 45 bar for A2L/A3 systems and 130 bar for CO2 systems), while inner 3A desiccant matrices must absorb moisture without stripping or reacting with synthetic ester oils (POE) or polyalkylene glycol (PAG) lubricants. Taojun's copper and steel filter drier product lines are specially manufactured and 100% helium-tested to meet these rigorous safety and performance thresholds.
| Austrian Application Sector | Typical Refrigerants | Operating Stress & Challenge | Taojun Filter Drier Solution |
|---|---|---|---|
| Alpine Heat Pumps (Residential & Commercial) | R290 (Propane), R32, R454B | High sub-cooling temperatures, deep winter thermal cycling, moisture crystallization risks. | Argon-arc welded copper filter driers with 3A synthetic zeolite, retaining ≥20% water adsorption at elevated pressures. |
| Supermarket & Cold Storage Logistics (Vienna & Graz) | R744 (CO2), R449A, R448A | Transcritical high-side pressures, continuous duty, extreme acid accumulation risk. | Liquid line driers with integrated sight glass (SEG series), solid core matrix, dual-stage filtration down to 20 microns. |
| Austrian Beverage & Dairy Processing (Salzburg, Tyrol) | R134a, R513A, R1234ze | Heavy washdown environments, chemical atmospheric exposure, strict sanitary uptime. | Corrosion-resistant high-purity copper shells, vibration-proof spun copper bodies, extruded filtration fittings. |
| Pharma & Cleanroom Climate Control | Ultra-low GWP synthetic & natural mixtures | Zero tolerance for particulate contamination, absolute dew point depression. | High-density molecular cores baked in vacuum ovens, hermetically capped with nitrogen charge. |
A heritage of engineering precision spanning over three decades, bridging world-class manufacturing with European commercial standards.
Ningbo Taojun Refrigeration Equipment Co., Ltd. is located in Xiangshan, Ningbo, a beautiful tourist city. Founded in 1988, its predecessor was Xiangshan Refrigeration Accessories Factory of Zhejiang University. The company's leading products include: filter dries, check valves, air conditioning valves, condensers, brass and copper accessories, air conditioning cable ties and other refrigeration accessories series products. After 30 years of hard work and rapid development, it has now become a comprehensive enterprise integrating the design and development, production and sales, and after-sales service of refrigeration accessories. In 2021, it became a national high-tech enterprise. Our company is committed to technological and process innovation, equipment improvement, and the introduction of advanced management concepts to produce first-class products. Customer satisfaction is our unwavering pursuit. With reasonable design, reliable quality, and perfect after-sales service, the "Lingshan" filter has become a well-known brand in the domestic refrigeration industry. The company has successively passed ISO9001:2008 quality management system certification, EU ROHS environmental protection directive certification, and US UL certification. The company always takes customer needs as the basis and continuously innovates management concepts to ensure efficient and stable development.
In 2012, Ningbo Taojun Refrigeration Equipment Co., Ltd. was established, creating the brand "Taojun" condensers, "Taojun" stop valves and other series of products. Over the years, it has established partnerships with well-known domestic and foreign home appliance enterprises such as Haier, Xinfei, Midea, Gree, Whirlpool, Electrolux, and Huarui. The product sales network covers major and medium-sized cities in China and is exported to Europe, America, South America, Southeast Asia, the Middle East, Africa and other overseas markets. The company's goal is to support and cooperate with every sincere customer to achieve a win-win situation.
We supply Austrian HVAC distributors, heat pump manufacturers in Carinthia and Upper Austria, and regional commercial refrigeration contractors with dependable, certified precision components.
Engineered moisture removal and contaminant filtration powering refrigeration reliability.
Taojun is specialized in refrigeration parts 38years. Filter drier, access valve, condenser, Feature: TAOJUN copper filter driers are designed to absorb moisture and acid, and to filter out impurities. Normally be installed as component and replaced as repair part for both domestic and commercial refrigerators, freezers.
Five bedrock pillars of European-tier manufacturing excellence, precision R&D, and stringent quality control.
Our core manufacturing equipment is imported directly from Germany, ensuring sub-micron dimensional precision and automatic welding integrity.
We have 15 engineers in our R&D centre, all of them are doctors or professors from University of Science and Technology of China.
Customized sizes and shapes are available. Welcome to share your idea with us, let's work together to make life more creative.
Core Raw Material: Our ITO film (no shrinkage, no color difference) and liquid crystal spacer (excellent uniformity) are imported directly from Japan; glue is imported directly from Europe; our liquid crystal temperature range is 70°C and protective film is resist to high temperature 80-90°C.
Finished Products Testing: High & low temperature test at 75°C and -35°C for 500 hours; thermal shock test 10°C-90°C for 30 minutes; damp heat test for 500 hours; moisture removed by oven; smart films in sheet are powered by a 24-hour aging test; smart films in roll are tested with 100V high voltage to make sure zero breakdown.
Deep-dive into molecular composition, mechanical housing properties, and performance parameters.
TAOJUN was established in 1988 and has been producing copper filter drier for 41 years. We have domestic leading research and development ability in refrigeration parts, as well as industry-advanced level in refrigeration parts, quality control abilities. Since started, taojun competing ability is always considered to be technology.
TAOJUN copper filter driers are designed to absorb moisture and acid, and to filter out impurities. Normally be installed as component and replaced as repair part for both domestic and commercial refrigerators, freezers.
Specialized components customized for European OEMs, wholesalers, and after-market HVAC service contractors.
Designed for compact icemakers and beverage chillers requiring rapid water capture without restricting refrigerant flow.
High-capacity solid desiccant core engineered to withstand demanding continuous ice batch cooling cycles.
Precision-extruded copper bends, tees, and connection sleeves meeting European EN 1254-1 engineering tolerances.
Standardized filter drier sizes (10g, 15g, 20g, 30g) with spun ends for effortless automated brazing on production lines.
Dual-function acoustic dampening and liquid refrigerant buffering for domestic and light-commercial split systems.
Custom tailor-made filter assemblies designed to match customer OEM drawings with customized inlet and outlet tube diameters.
Corrosion-resistant forged brass flare nuts, adapters, and pipe unions for trouble-free field service connections.
Zero-refrigerant-loss Schrader-style access valves ensuring compliance with Austrian environmental leak-check guidelines.
Recognized for intellectual property contributions, advanced manufacturing patents, and rigorous industry conformity.

National Utility Model Patent: Advanced Refrigeration Filter Assembly

High-Efficiency Desiccant Retention Patent
Comprehensive auxiliary equipment and refrigeration hardware complementing filter driers across Austrian projects.






For Precision Refrigeration Components (Filter Driers, Condensers, Access Valves)
Juntao Refrigeration (NINGBO TAOJUN REFRIGERATION EQUIPMENT CO.,LTD.) stands as a globally recognized leader in the design and production of critical refrigeration components. With our official GB/T19001-2016/ISO9001:2015 certification (Registration No.: 41325Q00065R0S), we demonstrate uncompromising commitment to quality in manufacturing filter driers, condensers, and access valves.
This certification, verifiable via China's CNCA (www.cnca.gov.cn) and our partner Zhongci International (www.zcgirz.com), validates our advanced OEM and ODM capabilities for clients worldwide. For partners seeking reliable refrigeration component solutions, Juntao delivers innovation, precision, and supply chain security from our ISO-certified facility in Zhejiang, China.
Why Certification Matters in Refrigeration Manufacturing:
Certified innovation in component engineering for thermal efficiency, durability, and compatibility.
Standardized manufacturing of refrigeration parts with traceable quality metrics.
Annual surveillance audits (mandated under our certification) guarantee consistent output.

Main Certification Document

Detailed Scope of Certification

Enterprise Honor

Audit Verified

Quality Standards

Patent Certificate

Utility Model
Take an inside look at our advanced cleanroom assembly, automatic copper spinning lines, and helium leak detection chambers.

















Guiding principles that define our partnerships with Austrian and global industrial stakeholders.
A world brand is supported by a corporate culture. We fully understand that her corporate culture can only be formed through Impact, Infiltration and Integration. The development of our group has been supported by her core values over the past years ——— Honesty, Innovation, Responsibility, Cooperation.
Our group always adhere to the principle, people-oriented, integrity management, quality utmost, premium reputation. Honesty has become the real source of our group's competitive edge. Having such spirit, We have taken every step in a steady and firm way.
Innovation is the essence of our group culture. Innovation leads to development, which leads to increased strength, All originates from innovation. Our people make innovations in concept, mechanism, technology and management. Our enterprise is forever in an activated status to accommodate strategic and environmental changes and be prepared for emerging opportunities.
Responsibility enables one to have perseverance. Our group has a strong sense of responsibility and mission for clients and society. The power of such responsibility can not be seen, but can be felt. It has always been the driving force for the development of our group.
Cooperation is the source of development. We strive to build a cooperate group. Work together to create a win-win situation is regarded as a very important goal for the development of corporate. By effectively carrying out integrity cooperation, Our group has managed to achieve integration of resources, mutual complementarity, let Professional people give full play to their specialty.
End-to-end technical backing designed for overseas buyers.
- Inquiry and consulting support. 15 years pump technical experience.
- One-to-one sales engineer technical service.
- Hot-line of service is available in 24h, responded in 8h.
- Technical training Equipment evaluation;
- Installation and debugging Troubleshoot;
- Maintenance Update and improvement;
- One-year warranty. Provide technical support free all-life of the products.
- Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
Dedicated English and German technical documentation, custom packaging compliant with ISPM-15 export wood packing standards, and door-to-door logistics to Vienna, Graz, Linz, or Innsbruck.
Comprehensive portfolio of copper filter driers, accumulators, insulated linesets, and precision control valves.
Multi-purpose fluid accumulator and pulsation damper for heat pumps and split AC units in Austria.
View Product Details →High-tensile silver-brass alloy rods ensuring flux-free hermetic connections on copper tubing networks.
View Product Details →Engineered core desiccant unit tailored for continuous operation in commercial catering and hospitality.
View Product Details →Custom molecular sieve weight (10g, 15g, 20g) spun copper drier for domestic refrigeration appliances.
View Product Details →Dual-inlet desiccant drier built for commercial ice machines and display showcases throughout Austria.
View Product Details →UV-resistant, flame-retardant closed-cell pre-insulated line sets conforming to European building codes.
View Product Details →Integrated solid core filter drier with moisture indicator sight glass for rapid visual diagnostic in Austrian cold rooms.
View Product Details →High-precision manifold dual gauge set with anti-flutter dials for professional field commissioning and maintenance.
View Product Details →